As seen here: 3,595USD
DHL
Shipping:
USA 184 USD,
Europe
223 USD, Asia 278 USD
The 9 braces Hauser fan is
the most thoroughly tested fan brace setup on the planet. It is the result
of many years of experimenting. It is braced on Torres 4 fan brace design.
The braces act as sound vibrations highways...they carry the vibration
of each string to a specific spot on the soundboard. If you put your fingers
on the soundboard as you play the 6th string for instance, you will feel
the upper portion of the top vibrate with more power than the rest of the
top. You will be able to feel this vibrations with your fingertips
all the way to the 4th strings. It is harder to feel the vibration caused
by the treble strings. The variations on the 9 braces fan is enormous.
Luthier taylor each fan to achieve a specific sound and match the instrument
with the rest of the woods used in the construction. Above to the left
is a 9 braces all Spruce fan. I often use a mixture of Cedar, Spruce and
Mahogany to match different wood combinations.
650 mm
or 640 mm?
Keep the following
rule at hand: If the distance between the tip of your thumb and the tip
of your little finger is equal or less than 9 in. when fully stretched,
use 640 mm

|
Request the signed poster

Radiused or flat fingerboard?
The radiused fingerboard has been
around the acoustic and the electric guitar since day one. The same is
true for most instruments of the Stringed family of instruments (violas,
violins cellos, bass). Radiusing (image above) makes barre and left hand
stopping A LOT easier. The only drawback is that you will NEVER want to
play a flat fingerboard after that. If you are having your custom
guitar built, I am all pro radiusing the fingerboard. The standard
fingerboard is flat. |