|
USD 3,959
Order this exact instrument clicking
below
DHL
Shipping:
USA 184 USD,
Europe
223 USD, Asia 278 USD
|
Sinker logs (top # 2), are
pulled from the bottom of lakes and rivers. Sometimes, scuba divers are
needed to achieve the extraction. Most of these logs are hundreds
of years old (In one of the pictures above, you can see that the tree was
cut with an hatchet). Due to a series of factors (The logs were too big
and heavy to be pulled out of the rivers or the logs were caught by currents
and were sucked to the bottom) these logs were trapped by the muddy
buttons of these water beds and this created like a time capsule where
the wood was preserved in fantastic humidity conditions that made the wood
season in a slow natural way during many centuries. Some of the logs are
selected for musical instruments construction. The sound that these woods
produce is unique and the grain has a beautiful coloration that changes
according to the type of mud present in the water bed.
650 mm
or 640 mm?
Keep the following
rule at hand: If the distance between the tip of your thumb and the tip
of your little finger is equal or less than 9 in. when fully stretched,
use 640 mm
|
The lattice is a concept
based on the A frame of grand pianos. The back and sides are kept rigid
by means of a sturdy A shaped frame and the top is thinned as much as possible
to allow the top to vibrate generously. Lattice delivers a lot of volume
a tremendous clarity.
Radiused or flat fingerboard?
The radiused fingerboard has been
around the acoustic and the electric guitar since day one. The same is
true for most instruments of the Stringed family of instruments (violas,
violins cellos, bass). Radiusing (image above) makes barre and left hand
stopping A LOT easier. The only drawback is that you will NEVER want to
play a flat fingerboard after that. If you are having your custom
guitar built, I am all pro radiusing the fingerboard. The standard
fingerboard is flat.
|
